自動上料攪拌車柔性正確操作方法可以歸納為：一輕、二穩、三離、四勤、五協調、六嚴禁。
The flexible and correct operation methods of automatic feeding mixer can be summarized as: one light, two stable, three separation, four diligence, five coordination and six prohibition.
一輕：在自動上料攪拌車作業時腳跟緊抵駕駛室地板，腳板和油門踏板保持平行，輕緩地下壓加油踏板。
One light: in the operation of the automatic feeding mixer, the heel is close to the floor of the cab, the foot board and the accelerator pedal are parallel, and the refueling pedal is pressed gently.
二穩：自動上料攪拌車在作業中，油門始終要穩住。一般作業狀態下，油門開度在70%左右為宜。
Two stable: automatic feeding mixer in the operation, the throttle should always be stable. In general operation, the throttle opening should be about 70%.
三離：在自動上料攪拌車作業時，腳板應和制動踏板分離開，平放到駕駛室地板上，決不能踩在制動踏板上。自動上料攪拌車常常在凹凸不平的工地作業，如果腳總是踩在制動踏板上，機身上下竄動會造成駕駛員不輕意地踩制動踏板。一般情況下，要用控制油門減速的辦法控制機況和換擋。這樣既避免了頻繁制動造成制動系統過熱，又為自動上料攪拌車快捷的提速帶來方便。
Three separation: during the operation of the automatic feeding mixer, the foot plate should be separated from the brake pedal, and placed flat on the floor of the cab. Never step on the brake pedal. Automatic feeding mixer often works on uneven construction site. If the foot is always on the brake pedal, the body will move up and down, which will cause the driver to step on the brake pedal carelessly. Under normal circumstances, to control the throttle deceleration method to control the machine condition and shift. In this way, the overheat of the braking system caused by frequent braking is avoided, and it is convenient for the quick speed-up of the automatic feeding mixer.
圖片
picture
四勤：在自動上料攪拌車作業時，特別是在鏟挖作業時，應在油門穩定情況下，用循環扳動起升和轉斗操縱桿的方法使鏟斗鏟滿物料。起升和轉斗操縱杠的循環扳動就是所說的“勤”。這個過程非常重要，對耗油量的影響很大。
Four frequently: in the operation of automatic feeding mixer, especially in the digging operation, under the condition of stable throttle, the bucket shall be filled with materials by means of cyclic pulling the lifting and rotating bucket control lever. The cyclic pulling of lifting and rotating bucket control lever is called "diligence". This process is very important and has a great impact on fuel consumption.
五協調：協調就是起升和轉斗操縱杠有機的配合。自動上料攪拌車一般的鏟挖過程是將鏟斗平放在地面，平穩地駛向料堆。在鏟斗平行鏟往料堆遇阻力時，應遵循先起臂后收斗的原則。這樣可以有效地避免鏟斗底部受到阻力，從而能夠充分發揮的掘起力。
Five coordination: coordination is the organic coordination of lifting and rotary bucket control lever. The general digging process of automatic feeding mixer is to put the bucket flat on the ground and drive to the material pile smoothly. When the bucket is parallel to the material pile and meets resistance, the principle of lifting the arm first and then retracting the bucket should be followed. This can effectively avoid resistance at the bottom of the bucket, so as to give full play to the maximum digging force.
Laizhou Jufeng machinery focuses on the industry for many years, focusing on the production and research of automatic feeding mixer. Welcome to our website http://www.ksmayo.cn For consultation and understanding, welcome to visit
山汽微信
2022-12-23
首頁
產品
電話
置頂