在建筑工地,自動上料攪拌車的使用非常普遍。自動上料攪拌車在使用過程中,常常會遇到散熱系統的故障,下面為大家分析一下這種故障的原因。
In construction sites, the use of automatic loading mixer is very common. In the process of using the automatic feeding mixer, we often encounter the failure of the heat dissipation system. Let's analyze the causes of this failure.
液壓油冷卻系統通常由以下四個部分組成,容易發生故障的是保護整個回路的保險,因此,駕駛混凝土攪拌車的朋友遇到了這樣的問題。普通的。接下來,對其他零件進行故障排除。
The hydraulic oil cooling system is usually composed of the following four parts. What is prone to failure is the insurance to protect the whole circuit. Therefore, friends driving concrete mixers encounter such problems. ordinary. Next, troubleshoot other parts.
自動上料攪拌車的罐體的操作是通過液壓傳動裝置進行的。液壓油長時間以恒定速度流過管道,并在管道壁上摩擦。它還增加了對各種閥門,管道和油泵的阻力。當液壓流體被壓縮時,液壓流體產生熱量并且油溫升高。
The operation of the tank body of the automatic feeding mixer truck is carried out through the hydraulic transmission device. The hydraulic oil flows through the pipe at a constant speed for a long time and rubs on the pipe wall. It also increases the resistance to various valves, pipelines and oil pumps. When the hydraulic fluid is compressed, the hydraulic fluid generates heat and the oil temperature increases.
自動上料攪拌車的液壓油可以正常工作。保持恒定溫度是很好的,但是如果溫度超過溫度范圍,則不僅整個操作系統會變得不穩定,而且密封也會變得不穩定。它將損壞,并且液壓油會氧化并變質
The hydraulic oil of the automatic feeding mixer can work normally. Maintaining a constant temperature is good, but if the temperature exceeds the temperature range, not only the whole operating system will become unstable, but also the seal will become unstable. It will be damaged and the hydraulic oil will oxidize and deteriorate
The above is about the automatic feeding mixer http://www.ksmayo.cn/ I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service