久久综合给合久久狠狠狠97色69,国产欧美在线观看不卡,少妇高潮流白浆在线观看,亚洲熟女精品中文字幕

山東山汽工程機械(集團)有限公司
熱線電話:400-879-1999 山汽微信
鄭重聲明 購機 售后
在線詢價
熱線電話:400-879-1999
您現在所在的位置: 首頁> 新聞資訊 > 公司新聞

自動裝載移動式混凝土攪拌車介紹

所屬分類:公司新聞 發布時間:2021-09-06 來源:http://www.ksmayo.cn 瀏覽量:0

1、攪拌單元: 攪拌倉容量 3450立升,混凝土輸出量2.5立米/次。 雙螺旋結構。液壓電機,行星齒輪傳動。 正反轉實現攪拌,卸料。攪拌筒300°回轉,在車輛四周1.9米以上高度傾倒混凝土。
1. Mixing unit: the capacity of mixing bin is 3450l, and the concrete output is 2.5m3/time. Double helix structure. Hydraulic motor, planetary gear drive. Mixing and unloading are realized by forward and reverse rotation. The mixing drum rotates 300 ° and dumps concrete at a height of more than 1.9m around the vehicle.
2、發動機:珀金斯渦輪增壓柴油機 1104 D-44 TA, 水冷式四缸,功率 62.5千瓦, 84馬力。后置。
2. Engine: Perkins turbocharged diesel engine 1104 d-44 TA, water-cooled four cylinder, maximum power 62.5 kW, 84 HP. Post.
3、傳動系統; 采用德國博士 力士樂液壓元件。 發動機帶動2套系統(4驅動行走和攪拌)工作。
3. Transmission system; German doctor Rexroth hydraulic components are adopted. The engine drives 2 sets of systems (4 drive walking and mixing) to work.
4、速度: 工作速度0-9/小時, 路上行走速度 0-25/小時。
4. Speed: the working speed is 0-9 km / h, and the walking speed on the road is 0-25 km / h.
5、駕駛席:前置具有Rops-Fops(防翻滾-防墜落)保護標準雙開門司機室。
5. Driver's seat: front double door cab with international ROPS FOPS (anti roll - anti fall) protection standard.
6、液壓系統: 3回路,2個可變輸出泵 分別帶動傳動系統和 回轉系統。2齒輪泵負責進出過濾系統,和水熱油的熱交換。
自動上料攪拌機
6. Hydraulic system: three circuits and two variable output pumps drive the transmission system and the rotation system respectively. 2 gear pump is responsible for the heat exchange with water and hot oil in and out of the filtration system.
7、操縱桿: 料斗的所有液壓控制動作由一個操縱桿完成。
7. Control lever: all hydraulic control actions of the hopper are completed by one control lever.
8、計量: 電子稱重單元為可選部件,具有司機室輸出打印功能。
8. Metering: the electronic weighing unit is an optional component and has the output printing function in the cab.
9、布料斗: 400立升帶有液壓控制閘門的料斗。
9. Distribution hopper: 400 liter hopper with hydraulic control gate.
10、出料滑道: 液壓控制可回轉.由2個銷軸固定,易拆卸來增加卸料高度。
10. Discharge chute: it can rotate under hydraulic control. It is fixed by two pin shafts and easy to disassemble to increase the discharge height.
11、供水: 車載水供應系統,附帶水表,高壓水槍(可選件)
11. Water supply: vehicle mounted water supply system, with water meter and high-pressure water gun (optional)
12、可爬行坡度:滿載時30%
12. Crawling slope: 30% at full load
13、制動系統: 油浴式盤式制動器。雙軸不同回路控制。 負液壓停車制動系統
13. Brake system: oil bath disc brake. Dual axis different loop control. Negative hydraulic parking brake system
14、輪胎:工程工業用胎12.5-20 PR 12.
14. Tire: engineering industrial tire 12.5-20 PR 12
15、轉向系統: 靜流體液壓 3向轉向,回轉半徑內部 1500mm 外部3500mm
15. Steering system: hydrostatic 3-way steering, with a turning radius of 1500mm inside and 3500mm outside
16、電力系統: 12V 120 Ah 電池提供路上照明和發動機啟動,緊急制動
16. Power system: 12V 120 ah battery provides road lighting, engine start and emergency braking
17、油,水箱:水 2×270立升 , 柴油 105立升,液壓油 80立升。
17. Oil, water tank: water 2 × 270 litres, 105 litres of diesel, 80 litres of hydraulic oil.
18、底盤: 滿足工程需要特制鋼質底盤
18. Chassis: special steel chassis to meet the needs of the project
19、重量:6100公斤 均勻分布在2軸上。
19. Weight: 6100kg, evenly distributed on 2 axes.
20、規范:本機械配備自動檢測和滿載自動鎖死閥門系統。如鏟臂工作時,可自動控制攪拌筒旋轉。
20. Safety specification: This machine is equipped with automatic detection and full load automatic locking valve system. If the shovel arm works, it can automatically control the rotation of the mixing drum.

 

首頁 產品 電話 置頂