The cylinder of small concrete mixer truck is a component that forms the working volume with the piston. The function of the cylinder is to convert the pressure energy of compressed air into mechanical energy, and the driving mechanism makes linear reciprocating motion, swing and rotation motion. So, how to prevent the cylinder of small concrete mixer from cracking? Let's introduce:

導致小型混凝土攪拌車氣缸破裂的因素很多，要預防氣缸破裂，應該做到：發動機溫度過高時，須等發動機溫度降低后，再加水發動；不得先啟動發動機，后加冷.卻水，以免使氣缸崩裂；在嚴寒條件下車，須放凈冷.卻水，啟動車時加熱水啟動；冬季停車若時間較長，又不能放水時，可間歇發動車輛，保持發動機有一定溫度而不致于結冰，不得用噴燈或明火直接烤車，同時使用的冷.卻水要潔凈。

There are many factors leading to the cylinder rupture of small concrete mixer truck. To prevent the cylinder rupture, we should do: when the engine temperature is too high, we must wait until the engine temperature decreases, and then add water to start; Do not start the engine after it is cold Drain the water to avoid cracking the cylinder; When getting off in severe cold conditions, you must let it cool When the vehicle is started, the water is heated; If the parking time in winter is long and the water cannot be drained, the vehicle can be started intermittently to keep the engine at a certain temperature without freezing. It is not allowed to bake the vehicle directly with blowtorch or open fire. At the same time, it is cold But the water must be clean.

小型混凝土攪拌車如果氣缸套出現破損，發動機在進氣行程時會吸入冷.卻液，而在壓縮行程和做功行程時高壓氣體又會從破損處進入冷.卻水道。無論出現哪一種情況，都將妨礙可燃混合氣的形成和燃燒，甚使發動機不正常工作，將嚴重影響發動機的使用壽命。

If the cylinder liner of a small concrete mixer is damaged, the engine will absorb cold air during the intake stroke In the compression stroke and work stroke, the high-pressure gas will enter the cold from the damaged place But the waterway. No matter what happens, it will hinder the formation and combustion of combustible mixture, and even make the engine work abnormally, which will seriously affect the service life of the engine.

以上就是為大家介紹的有關自動上料攪拌車的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.ksmayo.cn/

The above is a detailed introduction to the automatic feeding mixer truck. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.ksmayo.cn/