全自動上料攪拌車一般在放料完成后,卸料部分會殘留許多混凝土,一般情況下用清水清理即可,可是遇到已經凝固在混凝土攪拌運輸罐上的情況下,我們該怎么辦? 混凝土攪拌運輸車在完成方料后就應當進行的清洗保養及維護。
Generally, a lot of concrete will remain in the discharge part of the full-automatic loading mixer after discharging. Generally, it can be cleaned with clear water. However, when it is solidified on the concrete mixing and transportation tank, what should we do? The concrete mixer truck should carry out professional cleaning and maintenance after the completion of the square material.
以免降低混凝土攪拌運輸車的使用壽命,許多罐車司機們也知道這個道理,也經常對混凝土攪拌運輸罐卸料部分進行清理維護,但是有一個問題就是大家往往忽略的,就是用不好用不對清洗液也是會造成卸料部分損壞的。
In order to avoid reducing the service life of the concrete mixing truck, many tank truck drivers also know this truth, and often clean and maintain the unloading part of the concrete mixing transport tank. However, there is a problem that we often ignore, that is, if the cleaning fluid is not used properly, the unloading part will be damaged.
1、用好的清洗液,掌握正確的方法,適當用量,正確的使用標準可以參考清洗液的說明書,而且要適量,否則清洗液里面的化學成分會損壞混凝土攪拌運輸罐的相關結果。
1. Use a good cleaning fluid, master the correct method, appropriate dosage, and correct use standard. Refer to the instruction manual of the cleaning fluid, and the proper amount should be used. Otherwise, the chemical composition in the cleaning fluid will damage the relevant results of the concrete mixing and transportation tank.
2、選擇清洗液,一般用常見的堿性溶液,不要使用化學成分高的,濃度高的清洗產品。 混凝土攪拌運輸罐在日常生活中是使用非常頻繁的,所以,清洗混凝土攪拌運輸罐也是相當重要的。
2. Choose cleaning solution, generally use common alkaline solution, do not use high chemical composition, high concentration of cleaning products. The concrete mixing transportation tank is used very frequently in daily life, so it is very important to clean the concrete mixing transport tank.
以上是關于全自動上料攪拌車使用過程中清洗重要性的介紹,希望對大家有所幫助,想要了解更多內容請繼續關注我們的網站。
The above is the introduction of the importance of cleaning in the process of full-automatic feeding mixer. I hope it will help you. If you want to know more, please continue to pay attention to our website.