全自動上料攪拌機使用過程中清洗很重要
It is very important to clean the full-automatic feeding mixer during use
全自動上料攪拌機一般在放料完成后,卸料部分會殘留許多混凝土,一般情況下用清水清理即可,可是遇到已經凝固在混凝土攪拌運輸罐上的情況下,我們該怎么辦? 混凝土攪拌運輸罐在完成方料后就應當進行清洗保養及維護。
Generally, a lot of concrete will remain in the discharge part of the full-automatic feeding mixer after discharging. Generally, it can be cleaned with clean water, but what should we do when it has solidified on the concrete mixing and transportation tank? The concrete mixing and transportation tank shall be cleaned, maintained and maintained after the completion of square materials.
以免降低混凝土攪拌運輸罐的使用壽命,許多罐車司機們也知道這個道理,也經常對混凝土攪拌運輸罐卸料部分進行清理維護,但是有一個問題就是大家往往忽略的,就是用不好用不對清洗液也是會造成卸料部分損壞的。
In order to avoid reducing the service life of the concrete mixing and transportation tank, many tank truck drivers also know this truth and often clean and maintain the unloading part of the concrete mixing and transportation tank. However, there is a problem that we often ignore, that is, the unloading part will be damaged if it is not easy to use and the cleaning solution is not used properly.
1、用好的清洗液,掌握正確的方法,適當用量,正確的使用標準可以參考清洗液的說明書,而且要適量,否則清洗液里面的化學成分會損壞混凝土攪拌運輸罐的相關結果。
1. Use a good cleaning solution, master the correct method, appropriate dosage and correct use standard. Refer to the instructions of the cleaning solution, and be appropriate, otherwise the chemical composition in the cleaning solution will damage the relevant results of the concrete mixing and transportation tank.
2、選擇清洗液,一般用常見的堿性溶液,不要使用化學成分高的,濃度高的清洗產品。 混凝土攪拌運輸罐在日常生活中是使用非常頻繁的,所以,清洗混凝土攪拌運輸罐也是相當重要的。
2. Choose cleaning solution, generally use common alkaline solution, and do not use cleaning products with high chemical composition and high concentration. Concrete mixing transport tank is frequently used in daily life, so it is also very important to clean concrete mixing transport tank.
This article is provided by the automatic feeding mixer. Our website is: http://www.ksmayo.cn/ We will serve you with wholehearted enthusiasm. Welcome to visit!