1、自上料攪拌車卸料前讓攪拌罐全速運轉一兩分鐘。讓混凝土充分攪拌,必要時可以加一些水,讓混凝土攪拌得更均勻,也方便卸料。
1. Allow the mixing tank to run at full speed for one or two minutes before discharging from the charging mixer truck. The concrete shall be fully mixed. If necessary, some water can be added to make the concrete more uniform and convenient for unloading.
2、自上料攪拌車攪拌罐一定要仔細地沖洗干凈。洗罐子時要仔細的沖洗干凈,并把水反復的正反轉兩次,再放出來,一趟時把水箱的水全部放進罐子,再回到站加水清洗罐子。
2. The mixing tank of the feeding mixer truck must be carefully washed. When washing the tank, wash it carefully, and turn the water forward and backward twice, and then release it. In one trip, put all the water in the tank into the tank, and then return to the station to add water to clean the tank.
3、卸料不要大意和放料工打好關系。放料時自己看著,免得放料工亂操作放料操作桿,每次自上料攪拌車罐子正反轉中間位子時停一下,保護減速機,托輪等。與放料工打好關系,卸料時也不要睡的太熟,萬一工人鬧情緒,把你自上料攪拌車放到工地不轉罐子,造成悶罐就麻煩了。
3. Don't be careless when unloading materials. When discharging, watch yourself to prevent the discharger from operating the discharging lever randomly. Stop every time when the tank of the feeding mixer rotates forward and backward in the middle to protect the reducer, supporting wheel, etc. Keep a good relationship with the discharging workers, and don't sleep too well when discharging materials. In case the workers get upset and put your self feeding mixer on the construction site without turning the cans, it will be troublesome if the cans become stuffy.
4、放料前先把出料斗溜槽打濕。放料時把車盡量停在平地上放料前先把出料斗溜槽打濕,方便清洗。
4. Wet the chute of the discharge hopper before discharging. When discharging, park the truck on the flat ground as much as possible and wet the chute of the discharge hopper before discharging to facilitate cleaning.
The above is a detailed introduction to the automatic feeding mixer, and we hope it will be helpful to you. If you have any questions, you are welcome to contact us. We will provide services for you with our attitude http://www.ksmayo.cn