全自動上料攪拌車偶爾會出現很多土渣未被清楚干凈情況，因此在作業過程中才會出現很多事故，小編同學告訴大家5種方法可以輕松將自動上料攪拌車的渣土清理干凈，快去看看吧！
Occasionally, there will be a lot of soil residue is not clear and clean in the full-automatic feeding mixer, so there will be a lot of accidents in the process of operation. I'd like to tell you that five methods can easily clean up the residue of the automatic feeding mixer. Go and have a look!
首先應準備好緊急驅動軟管，將機械熄火，卸下液壓馬達上的高壓油管接頭。
First, prepare the emergency drive hose, turn off the machine, and remove the high-pressure oil pipe joint on the hydraulic motor.
將救援車熄火，將液壓馬達的高壓油管拆卸，并與故障車上的相應接頭利用緊急驅動軟管相連接。
Shut down the rescue vehicle, dismantle the high-pressure oil pipe of the hydraulic motor, and connect it with the corresponding connector on the fault vehicle by using the emergency drive hose.
發動救援車并將操作手柄撥動至出料位置，故障車中的混合便會被排出。
Start the rescue vehicle and move the operating handle to the discharging position, and the mixture in the fault vehicle will be discharged.
當緊急驅動完成后，將自動上料攪拌車中的驅動軟管拆卸，并回復至原狀。
When the emergency drive is completed, remove the drive hose in the automatic feeding mixer and return to the original state.
在拖輪、滾道間放入木楔，并控制攪拌筒的旋轉，將發動機熄火，將液壓馬達的一根高壓油管拆卸，攪拌筒可自由旋轉并控制攪拌筒的旋轉。從而讓維修孔轉到下部位置，然后將維修孔打開，并清理出筒中的混凝土，當混凝土排出完成后，恢復自動上料攪拌車的原來狀態即可。
Put a wooden wedge between the tugboat and the raceway, control the rotation of the mixing drum, turn off the engine, and dismantle a high-pressure oil pipe of the hydraulic motor. The mixing drum can rotate freely and control the rotation of the mixing drum. So that the maintenance hole is turned to the lower position, and then the maintenance hole is opened, and the concrete in the cylinder is cleaned out. When the concrete is discharged, the original state of the automatic feeding mixer can be restored.
以上5種方式均可將殘留其中的土渣清除干凈，不管您會現在哪種方法都要注意安全問題，想要了解更多內容歡迎點擊我們的http://www.ksmayo.cn網站。
The above five methods can remove the residue, no matter which method you will now, you should pay attention to the safety issues. For more information, please click our http://www.ksmayo.cn Website. 全自動上料攪拌車偶爾會出現很多土渣未被清楚干凈情況，因此在作業過程中才會出現很多事故，小編同學告訴大家5種方法可以輕松將自動上料攪拌車的渣土清理干凈，快去看看吧！
Occasionally, there will be a lot of soil residue is not clear and clean in the full-automatic feeding mixer, so there will be a lot of accidents in the process of operation. I'd like to tell you that five methods can easily clean up the residue of the automatic feeding mixer. Go and have a look!
首先應準備好緊急驅動軟管，將機械熄火，卸下液壓馬達上的高壓油管接頭。
First, prepare the emergency drive hose, turn off the machine, and remove the high-pressure oil pipe joint on the hydraulic motor.
將救援車熄火，將液壓馬達的高壓油管拆卸，并與故障車上的相應接頭利用緊急驅動軟管相連接。
Shut down the rescue vehicle, dismantle the high-pressure oil pipe of the hydraulic motor, and connect it with the corresponding connector on the fault vehicle by using the emergency drive hose.
發動救援車并將操作手柄撥動至出料位置，故障車中的混合便會被排出。
Start the rescue vehicle and move the operating handle to the discharging position, and the mixture in the fault vehicle will be discharged.
當緊急驅動完成后，將自動上料攪拌車中的驅動軟管拆卸，并回復至原狀。
When the emergency drive is completed, remove the drive hose in the automatic feeding mixer and return to the original state.
在拖輪、滾道間放入木楔，并控制攪拌筒的旋轉，將發動機熄火，將液壓馬達的一根高壓油管拆卸，攪拌筒可自由旋轉并控制攪拌筒的旋轉。從而讓維修孔轉到下部位置，然后將維修孔打開，并清理出筒中的混凝土，當混凝土排出完成后，恢復自動上料攪拌車的原來狀態即可。
Put a wooden wedge between the tugboat and the raceway, control the rotation of the mixing drum, turn off the engine, and dismantle a high-pressure oil pipe of the hydraulic motor. The mixing drum can rotate freely and control the rotation of the mixing drum. So that the maintenance hole is turned to the lower position, and then the maintenance hole is opened, and the concrete in the cylinder is cleaned out. When the concrete is discharged, the original state of the automatic feeding mixer can be restored.
The above five methods can remove the residue, no matter which method you will now, you should pay attention to the safety issues. For more information, please click our http://www.ksmayo.cn Website.
山汽官方微信
2022-12-23
首頁
產品
電話
置頂