自上料攪拌機車框架太大 ,輪距太小,過高車的穩定性結果就不言而喻了。這便是會發生側翻的因素,這點是非常重要的,也是直接關系到了安全,具體還會如何來看看:
Since the frame of the loading mixer is too large, the wheelbase is too small, and the center of gravity is too high, the stability results of the vehicle are self-evident. This is the factor that causes rollover, which is very important and directly related to safety. How can we look at it
我們都知道車的框架是在輪胎之上的,而正因此與地面接觸的就是輪胎。那么也就是說判斷一個道路是否能過,主要就是看自己的輪距是否在這個道路寬度之內。從而我們也知道,一個混凝土攪拌車的環境適應能力,不僅僅受到發動機的影響,還受到輪距的影響,那么我們自然而然知道小型混凝土攪拌車輪距的選擇有就非常重要了。
We all know that the frame of a car is above the tires, and that's why the tires come into contact with the ground. That is to say, to judge whether a road can pass or not, the main thing is to see whether the wheel tread is within the width of the road. Therefore, we also know that the environmental adaptability of a concrete mixer is not only affected by the engine, but also affected by the wheelbase. Therefore, we naturally know that the selection of wheelbase of small concrete mixer is very important.
輪距和車框架的搭配也是非常重要的。因為上面我們就說車框架是在輪胎之上的。那么合理的輪距承載多大的車框架,必須在合理承受范圍之內。正所謂量體裁衣,對車的衣服就是車框架。如果衣服裁的不合理,對于車不僅僅就是不好看那么簡單了,它的安全性也就大大下降。
It is also very important to match the wheelbase and the frame. Because we said that the car frame is above the tires. So the reasonable wheelbase bearing capacity of the car frame, must be within the reasonable bearing range. It is the so-called tailor-made, the clothes of the car is the car frame. If the clothes are cut unreasonably, the car is not only ugly, so simple, its safety will be greatly reduced.
以上是關于自上料攪拌機會發生側翻的機率的介紹,希望對大家有所幫助,如您想要了解更多內容歡迎關注我們的網站。
The above is the introduction of the probability of rollover of the mixing machine from feeding. I hope it will help you. If you want to know more, please pay attention to our website.