久久综合给合久久狠狠狠97色69,国产欧美在线观看不卡,少妇高潮流白浆在线观看,亚洲熟女精品中文字幕

山東山汽工程機械（集團）有限公司
熱線電話：400-879-1999 山汽官方微信
鄭重聲明 購機 售后
在線詢價
熱線電話：400-879-1999
您現在所在的位置: 首頁> 新聞資訊 > 行業新聞

混凝土攪拌車發動機外部清洗應該注意哪些？

所屬分類：行業新聞 發布時間：2020-12-04 來源：http://www.ksmayo.cn 瀏覽量：0

步驟一：首先用塑料薄膜將攪拌車分電器遮蓋起來，用半濕毛巾壓住薄膜，此舉可以防止高壓水沖進分電器，導致攪拌車故障。
Step 1: first cover the distributor of the mixer with plastic film, and press the film with a semi wet towel. This can prevent high-pressure water from rushing into the distributor and causing the mixer to malfunction.
步驟二：使用高壓水槍由攪拌車發動機側面按從上到下的順序將引擎室內側及攪拌車發動機外表的附著類污物沖凈。
Step 2: use a high-pressure water gun to clean the attached dirt on the inside of the engine and the outside of the mixer engine from top to bottom.
攪拌車小知識：混凝土攪拌車發動機外部清洗的正確打開方式
Mixer knowledge: the right way to open the external cleaning of concrete mixer engine
步驟三：將發動機外部清潔劑均勻噴灑在浸濕后的發動機及引擎室四周，等待三到五分鐘，用毛刷仔細清洗引擎室。
Step 3: spray the engine external cleaner evenly on the wet engine and around the engine room, wait for three to five minutes, and carefully clean the engine room with a brush.
步驟四：直接用高壓水槍快速沖洗污漬。
Step 4: wash the stains with high pressure water gun.
全自動上料攪拌車
攪拌車小知識：混凝土攪拌車發動機外部清洗的正確打開方式
Mixer knowledge: the right way to open the external cleaning of concrete mixer engine
步驟五：重復步驟三和步驟四，直至發動機表面清洗干凈
Step 5: repeat step 3 and step 4 until the engine surface is cleaned
步驟六：攪拌車發動機沖洗干凈后，用半濕毛巾擦干，擦不到的地方用風干機吸干，等待風干。
Step 6: after the mixer engine is washed clean, dry it with a semi wet towel, dry the area that can't be wiped with an air dryer, and finally wait for air drying.
步驟七：用塑料橡膠保護劑給引擎室內的塑料橡膠部件上光，然后給金屬部件鍍膜。
Step 7: polish the plastic rubber parts in the engine room with plastic rubber protector, and then coat the metal parts.
步驟八：所有步驟完成后，用干凈的無紡拋光巾檢驗攪拌車發動機和引擎室內側。
Step 8: after all steps are completed, inspect the mixer engine and the inside of the engine compartment with a clean non-woven polishing towel.

 

首頁 產品 電話 置頂