自動上料攪拌機目前在混凝土建筑行業比較常見，也是深受大家歡迎的混凝土攪拌器械，自動上料攪拌機的正常長壽命的順暢使用離不開日常有效的維護，下面讓我們一起來看下自動上料攪拌機如何進行有效維護：
At present, the automatic feeding mixer is common in the concrete construction industry and is also a popular concrete mixing equipment. The normal and long-life smooth use of the automatic feeding mixer is inseparable from daily effective maintenance. Let's take a look at how to effectively maintain the automatic feeding mixer:
1、自動上料攪拌機發動前，必須進行檢查，各部件量正?？煽?，螺栓連接是否緊固，操作是否靈活等。
1. Before starting the automatic feeding mixer, a comprehensive inspection must be carried out to ensure that the quantity of each component is normal and reliable, whether the bolt connection is fastened, whether the operation is flexible, etc.
2、各部位潤滑點示意要求進行，加油處必須保持干凈。
2. The lubrication points of all parts shall be carried out according to the schematic requirements, and the refueling place must be kept clean.
3、液壓、氣壓各系統管路是澡密封牢固，是否有磨損，是否有漏油，漏氣等現象應及時檢查排除。
3. The pipelines of hydraulic and pneumatic systems shall be sealed firmly, and whether there is wear, oil leakage, air leakage and other phenomena shall be checked and eliminated in time.
4、對液壓泵。液壓馬達，減速河曲等元件，必須遵循產品說明書的要求進行保養。
4. Check the hydraulic pump. Hydraulic motor, deceleration bend and other components must be maintained in accordance with the requirements of the product manual.
5、自動上料攪拌機要定期檢查攪拌葉片的磨損情況，作到及時修補。
5. The automatic feeding mixer shall regularly check the wear of mixing blades and repair them in time.
6、托輪的保養：每3個月應定期補加潤滑脂一次，攪拌筒托輪表面每天都要注油一次，已避免托輪異常磨損。
6. Maintenance of supporting roller: the lubricating grease shall be added regularly every 3 months, and the surface of the supporting roller of the mixing drum shall be filled with oil once a day to avoid abnormal wear of the supporting roller.
7、供水系的保養：混凝土攪拌車供水方式為氣壓供水，從底盤儲氣筒取氣，因此應經常檢查其氣路的密封性，以保證金底盤氣路不受影響。
7. Maintenance of water supply system: the water supply mode of concrete mixer truck is pneumatic water supply, and the air is taken from the chassis air reservoir. Therefore, the tightness of its air circuit should be checked frequently to ensure that the chassis air circuit will not be affected.
8、自動上料攪拌機的攪拌筒的保養：每次工作完華后，攪拌筒內必須有粗石子加清水洗干凈，按出料方法操作，把筒內積水排盡，同時也要對攪拌筒外表及底座周圍的水泥殘渣進行沖洗，正確處理和保養能延長攪拌筒的使用壽命。
8. Maintenance of mixing drum of automatic feeding mixer: after each work, there must be coarse stones in the mixing drum and washed with clean water. Operate according to the discharging method to drain the accumulated water in the drum. At the same time, wash the cement Residue around the surface of the mixing drum and the base. Correct treatment and maintenance can prolong the service life of the mixing drum.
9、人進入攪拌筒檢修時，發動機必須熄火，并將啟動鑰匙由進入攪拌筒檢修人員保管，以確保人身。
9. When people enter the mixing drum for maintenance, the engine must be turned off, and the start key shall be kept by the maintenance personnel entering the mixing drum to ensure personal safety.
10、下班時，攪拌筒。進出料裝置和車身外表要用水洗干凈，防止混凝土結在筒壁和葉片等地方上，如發現局部有混凝土凝結硬塊時，要盡快，但不得損壞機件。
10. When off duty, the mixing drum. The appearance of the feeding and discharging device and the vehicle body shall be washed with water to prevent the concrete from binding on the cylinder wall, blades and other places. If local concrete congealing hard blocks are found, they shall be removed as soon as possible, but the parts shall not be damaged.
11、冬季混凝土攪拌車不用時，應放凈水箱內及清洗管路的積水。
11. When the concrete mixer is not used in winter, the accumulated water in the water tank and the cleaning pipeline shall be drained.
The above is the automatic feeding mixer http://www.ksmayo.cn/ Thank you for your browsing. If you want to know other product information, please log in to our official website. Automatic mixer automatic feeding mixer
山汽微信
2022-12-23
首頁
產品
電話
置頂