久久综合给合久久狠狠狠97色69,国产欧美在线观看不卡,少妇高潮流白浆在线观看,亚洲熟女精品中文字幕

山東山汽工程機械（集團）有限公司
熱線電話：400-879-1999 山汽官方微信
鄭重聲明 購機 售后
在線詢價
熱線電話：400-879-1999
您現在所在的位置: 首頁> 新聞資訊 > 公司新聞

怎樣去除攪拌機上的刮痕？

所屬分類：公司新聞 發布時間：2020-10-28 來源：http://www.ksmayo.cn 瀏覽量：0

全自動上料攪拌機在使用的進程中會遭受各種的刮痕和損壞。有的人覺得刮痕沒有什么太大的問題，其實不然，假如一體車上的刮痕假如不及時處理的話，時間一長將會對一體車會收到損壞。接下來小編就跟大家聊一聊全自動上料攪拌機該如何保養，不小心蹭上劃痕該怎么辦。一起來看一下吧！
Automatic feeding mixer will suffer from various scratches and damages in the process of use. Some people think that there is no big problem with scratches. In fact, if the scratches on the integrated vehicle are not handled in time, the integrated vehicle will be damaged over a long period of time. Next, Xiaobian will talk to you about how to maintain the automatic feeding mixer and how to do if you scratch it carelessly. Let's have a look!
1、磨損傷痕的處理：
1. Treatment of wear scar:
一體車受到摩擦而構成的傷痕，咱們可以為車輛涂上鍍膜劑，涂抹進程要注意涂抹均勻。
We can apply the coating agent to the vehicle for the scratches caused by friction. The coating process should be uniform.
2、保險杠傷痕的修補：
2. Repair of bumper scar:
保險杠的傷痕處理辦法是將毛刺削去，坑洼部分涂上油灰使之滑潤。專用油灰，準備各種色彩，挑選較接近的色彩。與裝載機式一體車車身同色的保險杠，噴漆很重要。
The way to deal with the bumps is to polish the bumps. Special putty, prepare a variety of colors, choose a closer color. It is very important to paint the bumper in the same color as the body of the loader type all-in-one vehicle.
3、車身老化、傷痕的處理：
3. Treatment of body aging and scar:
不管什么樣的一體車都會有或大或小的傷痕。假如是不太奪目的傷痕，就可以不用去管它；假如一體車僅僅很淺的刮傷表漆，立即用混合劑處理，擦洗辦法為直線擦洗。傷痕消失后，用更細的混合劑擦洗之后再打上蠟。
No matter what kind of all-in-one car, there will be big or small scars. If it is not too eye-catching scars, it can not be taken care of; if the integrated car only scratch the surface paint, immediately use mixture treatment, scrubbing method for straight-line scrubbing. After the scars disappear, scrub them with a finer mixture and wax them.
               全自動上料攪拌機
4、較深傷痕的修補：
4. Repair of deep wounds:
很深但細長的傷痕，用五顏六色油灰可以修補得很好。傷痕處用砂紙，不要隨意將傷痕面擴展，重要的是將臟污清除干凈。油灰要細心得涂抹，是指徹底進入內部。然后涂上混合劑、上蠟，完畢作業。
It's a deep but slender scar that can be repaired well with colorful putty. Sand paper should be used for the scar. It is important to remove the dirt. Putty to be carefully applied, refers to thoroughly into the interior. Then apply the mixture, wax, finish the operation.
5、刮傷、表漆脫落的修補：
5. Repair of scratch and surface paint falling off:
較深的刮痕，可以用潤飾漆進行修補。用筆尖一點一點地址上去，然后等漆徹底干。
Deep scratches can be repaired with touch up paint. Use the tip of a pen to address it, and then wait for the paint to dry completely.
6、凹陷的修補保養訣竅：
6. Tips for repairing and maintaining sunken
凹陷處理是車身保養中叫費事的作業之一，首先要打好底子。噴漆時注意不要使涂料向周圍擴散。
Sunken treatment is one of the troublesome operations in body maintenance. First of all, we should lay a good foundation. Pay attention not to spread the paint around when spraying.
以上是關于怎樣去除全自動上料攪拌機上刮痕的介紹，希望對大家有所幫助，如您想了解更多內容歡迎點擊咨詢http://www.ksmayo.cn網站。
The above is about how to remove the scratch on the automatic feeding mixer, hope to help you, if you want to know more, welcome to click consultation http://www.ksmayo.cn Website.

 

首頁 產品 電話 置頂