久久综合给合久久狠狠狠97色69,国产欧美在线观看不卡,少妇高潮流白浆在线观看,亚洲熟女精品中文字幕

山東山汽工程機械（集團）有限公司
熱線電話：400-879-1999 山汽官方微信
鄭重聲明 購機 售后
在線詢價
熱線電話：400-879-1999
您現在所在的位置: 首頁> 新聞資訊 > 公司新聞

自動上料攪拌機延長使用壽命的方法

所屬分類：公司新聞 發布時間：2021-05-17 來源：http://www.ksmayo.cn 瀏覽量：0

1、對于新購入的車輛，初次使用50小時左右，就該檢查各處螺栓緊固情況。包括罐體封頭與減速機的連接螺栓，減速機底座與前臺的連接螺栓，拖輪底座與機架的連接螺栓，以及副梁與大梁的連接螺栓等。以后要保證每月定期檢查一次。
1. For newly purchased vehicles, if they are used for about 50 hours for the first time, it is necessary to check the tightening of bolts. It includes the connecting bolts between the tank head and the reducer, the connecting bolts between the reducer base and the front stage, the connecting bolts between the tugboat base and the frame, and the connecting bolts between the auxiliary beam and the girder. In the future, it is necessary to ensure regular inspection once a month.
2、我們應該至少每月一次清理托輪和滾道上的污物；通過托輪上的油嘴，向托輪內注入潤滑油脂。而且一定要保證傳動軸至少每月潤滑一次。
2. We should clean the dirt on the roller and raceway at least once a month; The lubricating grease is injected into the supporting roller through the oil nozzle on the supporting roller. And make sure that the transmission shaft is lubricated at least once a month.
自動上料攪拌機
3、液壓系統部件，這個地方的精度較高。尤其是攪拌車液壓泵，保養簡易，但要求很高。液壓油要定期更換，運行500小時，以后2000小時或至少每年更換一次，濾芯應該同時更換。切記在加油或換油時發動機必須處于停止狀態，否則將造成液壓系統損壞。
3. Hydraulic system components, this place has high precision. In particular, the mixer hydraulic pump is easy to maintain, but the requirements are very high. The hydraulic oil should be changed regularly, the first 500 hours, after 2000 hours or at least once a year, the filter element should be changed at the same time. Remember that the engine must be stopped when refueling or changing oil, otherwise the hydraulic system will be damaged.
4、每天行車前檢查托輪與滾道的結合面潤滑油是否干澀，應及時補充，保持良好的潤滑效果。每次在車輛發動之前，檢查冷卻器和減速機的油位，保證油位指示在目視范圍內；檢查液壓油路的密封情況，保持液壓系統清潔和密封，以免塵粒和水份等污染系統液壓油，造成系統不能正常工作或損壞。
4. Every day before driving, check whether the lubricating oil on the joint surface of the roller and the raceway is dry, and replenish it in time to maintain a good lubricating effect. Every time before the vehicle starts, check the oil level of the cooler and reducer to ensure that the oil level indication is within the visual range; Check the sealing condition of the hydraulic oil circuit, keep the hydraulic system clean and sealed, so as to avoid dust particles and water polluting the hydraulic oil of the system, causing the system not to work normally or damage.

 

首頁 產品 電話 置頂